MSFS 2020 & 2024 · SimConnect onlyMembers · BlueBird Hangar + 757 Deck, $49.95
Back to Marketplace
UtilitiesBothFeatured

FlightDeck SD — Stream Deck Edition Bundle · Includes FlightDeck Bridge 2.6

One colour-coded Stream Deck page per ATC network: VATSIM, SayIntentions, BeyondATC and Holds.

5.0 (5) 119 downloads Free

Version 2.6.1

by ClearedtoCode

5.73 MB
Instant download
MSFS 2020 + 2024
Tested before release
Built by simmers

Requirements

Requirements - FlightDeck Bridge 2.3 (included in this bundle). - Elgato Stream Deck software 6.9 or newer. - Stream Deck + or a 15-key Stream Deck (ready-made profiles for both). - Microsoft Flight Simulator 2020 or 2024 (needed for the COM and transponder keys). - Windows 10 or 11. - vPilot for VATSIM; the SayIntentions.AI app for SayIntentions; BeyondATC for BeyondATC. - Optional: free Hoppie logon code for CPDLC; Windows 10 (2004) or 11, 64-bit, for Voice ATC (about 160 MB downloaded the first time). Install 1. Right-click the downloaded zip and choose Extract All. 2. Double-click Install FlightDeck Bridge. It installs the bridge and runs ClearedToCode Stream Deck Setup, which adds the plugin and the profile. 3. In the Stream Deck app, pick the "FlightDeck Bridge" profile. You only need the networks you fly with - VATSIM, SayIntentions.AI and BeyondATC are all optional.

About this add-on

FlightDeck Bridge 2.3 gives every ATC network its own colour-coded page on your Stream Deck: VATSIM (green), SayIntentions (yellow), BeyondATC (purple) and Holds (cyan). Tune COM1 and COM2 from the dials, see the live ATIS letter, set the squawk ATC gave you with one press, and read back with one key.
You only fly one ATC network at a time, so each one gets its own page:
VATSIM (green)
- ATIS key shows the current letter for the station you have tuned, or your departure or arrival airport.
- COM1 and COM2 on the dials: turn to tune standby, push to swap, tap the strip for MHz or kHz.
- Transponder: the key turns orange when ATC gives you a new code, and one press sets it in the sim.
- Mode C, METAR, readback, and CPDLC message and WILCO keys.
SayIntentions.AI (yellow)
- Clearance, taxi, departure, climb, descent and go-around calls, spoken to SayIntentions.
- The same COM, transponder and ATC-call dials.
BeyondATC (purple)
- Keys that follow BeyondATC's own request menu, so you always see what you can ask for right now.
- Menu dial: turn to pick a request, push to send it. The ATIS letter from BeyondATC's D-ATIS.
Holds (cyan)
- The hold ATC gave you, drawn, with the entry type, EFC countdown, turns flown, and the hold calls.
Works on Stream Deck + (keys, dials and touch strip) and 15-key Stream Decks. The arrow key on each page takes you to the next network.
Easy install: run "Install FlightDeck Bridge" in the download. It installs the bridge, then ClearedToCode Stream Deck Setup adds the plugin and the profile in one step. Then pick the "FlightDeck Bridge" profile in the Stream Deck app.
The Stream Deck edition is available only here. The free FlightDeck Bridge does not include it.

Changelog

2.6.1 (October 24, 2026)
- Typing in the MSFS toolbar panel no longer fires sim keys (pressing g no longer moves the gear in MSFS 2024). Thanks to bud for the report.
v2.6.0
- Say again: with Voice ATC on, every transmission has a button that plays what the controller actually said (last 30 kept in memory on your PC)
- Standby in one tap: a Standby button next to Tune COM1 on every handoff and on every controller in the ATC list; "switch to", "change to" and "call ... on" count as handoffs too
- ATIS changed alert: your departure or arrival ATIS moves to a new letter and you're told what changed (runways, wind, altimeter)
- ATC online alert: a controller on your route logs on and you're told, with a one-tap Standby button
- Settings > ATIS and ATC alerts turns the alerts off
v2.5.1
- ICAO phonetic readbacks (Alfa, Bravo, Tree, Fife, Niner, Decimal)
- Stream Deck plugin reports its real version (2.5.1)
- Fixed Stream Deck setup saying the plugin "didn't take" after a successful update
v2.5
- Position reports: a ready-made Hoppie position report from the sim and your SimBrief route; tap to send.
- Live kneeboard: follows your flight phase and shows the next station with a Tune standby button.
- Flight log: every message of each session saved on your PC, with a Log tab, print and PDF.
- Voice ATC model choice: Fast, Balanced or Accurate.
- Optional full-screen alerts for SELCAL, private messages and datalink.
v2.4.2
- Fixed: CTAF frequencies now come straight from VATSIM
v2.4.1
- Fixed: the installer stopped with a "ForeColor" error on some PCs before anything was installed. It now runs through to the end.
v2.4
- FlightDeck Bridge 2.4: one-tap tune and squawk from ATC calls, vPilot dot commands (.metar, .ctaf and more), bigger text and a toolbar panel for MSFS 2020.
- Stream Deck plugin 2.4:
Fixed: changing a key's options in the Stream Deck app could fail with an error, because the settings panel sent them with the wrong ID.
- To update, run Install FlightDeck Bridge again. Your settings are kept.
v2.3: A colour-coded page per network (VATSIM, SayIntentions, BeyondATC, Holds). COM1/COM2 and transponder control straight from the sim. Live VATSIM ATIS letter on a key. BeyondATC support with its request menu on keys and a dial. New key art in each network's colours. One-click setup for the plugin and profile. FlightDeck Bridge 2.3 included. Plugin 2.3.0.0.
v2.2: FlightDeck Bridge 2.2 with Voice ATC. Voice calls from vPilot are turned into text on your PC; the ATC dial, Readback key and HoldDeck keys work with controllers on voice. Plugin 2.2.0.0.
v2.1 Initial release: FlightDeck Bridge 2.1 plus the FlightDeck Bridge Stream Deck plugin (21 actions, Hold and ATC dials for Stream Deck+, ready-made profiles for Stream Deck 15-key and Stream Deck+).

About the Creator

ClearedtoCode

✈️ Flight simulation software development 💻 MSFS 2020 & 2024 applications 🎙️ ATC, VATSIM, BeyondATC & SayIntentions.AI 📡 CPDLC, EFB & Stream Deck integrations 🚀 Built by Simmers. For Simmers.

Reviews

5.0

5 reviews on flightsim.to

Review it on flightsim.to
NO

NorwoodNinja

Oct 5, 2026
flightsim.to

BEYOND ATC AMAZING WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOW

ClearedToCode replied

Thank you I'm so happy you like it!!

Read on flightsim.to
AS

ashkemp86

Sep 29, 2026
flightsim.to

this is amazing having everything in the one place makes things so easy and having it tell you what to say to ATC is going to help so many people that are scared to make that jump. AMAZING!!!

ClearedToCode replied

Thanks for the kind words this is what i do it for!!!

Read on flightsim.to
BU

BudMorgan

Sep 25, 2026
flightsim.to

Absolutely brilliant. One thing - How can I zoom in to the text on the widget or the efb? These old eyes are terrible

ClearedToCode replied

Hi BudMorgan, the zoom you asked for is in v2.4, which just went live. Open FlightDeck in the EFB or the toolbar panel and tap A+ at the top right; the text goes up to 250%, and it remembers your size next time. The toolbar panel also connects more reliably in this version. Thanks for the push on this one, and let me know how it looks on your screen.

Read on flightsim.to
S1

S170811

Sep 17, 2026
flightsim.to

Just downloaded and installed it, looks pretty good. Look forward to testing it out over the weekend, I will let you know how I get on. Also all developers should take a leaf out of your book for the simple and user friendly installation method, bravo.

ClearedToCode replied

Thank you, that means a lot! v2.4 is out now, with one-tap tune and squawk from ATC calls, vPilot dot commands (.metar, .ctaf and more) and bigger text in the EFB. Installing over your current version keeps your settings. Let me know how it goes.

Read on flightsim.to
SY

syasurr14

Sep 15, 2026
flightsim.to

look Very Good! Will try this as soon as possible Thanks for the hard work!

ClearedToCode replied

Thank You! Let me know how it works for you. and anything we can do better!

Read on flightsim.to

Sign in to write a review.

Discussion (0)

View all

No discussions yet for this add-on.

Start a Discussion