What we're building

• Virtual Airlines 1.2.4: FlightLinq pilots can set up from their VA pack with their name and FlightLinq pilot ID, and the dashboard names FlightLinq airlines correctly.

• Virtual Airlines 1.2.3: Established VA profiles run on real time, and a clock that ran ahead comes back to today's date by itself once no flight is in the air. Career keeps its time compression.

• Design: AI Crew ships as an in-tablet app for all four tablets, approved
• Design: AI Crew is a paid add-on to the Suite
• Design: AI Crew for the Suite

• FlightLinq pilots can set up from their VA pack: the set-up card asks for your name and FlightLinq pilot ID, and you join as yourself.
• The dashboard names FlightLinq airlines correctly.

• Established VA profiles run on real time: no time compression, and the clock catches up to the real time after the app was closed.
• A clock that ran ahead comes back to today's date by itself, once no flight is in the air.

• Hub Fly page: show who may speak on 118.94 from Virtual Airlines SayIntentions status.
• An IATA code with a digit no longer sticks to the flight number

Released.

• Loading a flight no longer counts as flying.

• PMDG 777F flap placard is 245 kt, and a Fenix flex takeoff no longer counts as full thrust.
• Takeoff thrust time counts only full rated takeoff thrust
• AI Crew: the brain - one character turn with Claude, same code for own keys and hosted mode
• AI Crew: the four characters
• Fenix set 3.0.0: Fenix A32X 3.0 support
• Fenix set 3.0.1: no false EGT write-ups on the IAE V2500 variants

• PMDG Hangar on its own port: runs next to CTC Aircraft Maintenance on one PC
• Worn-engine thrust, 737 APU, FANS 2B MENU
• PMDG Hangar 1.0.1, diagnostics backend and the tablet UI shell

Released.

• Loading a flight no longer counts as flying.

• Engine cooldown: added up from the frames, a short push of taxi thrust is near idle
• No flying while the sim loads
• Branded installer
• Tablet 2.0: the shared MEL names no aircraft type; PMDG 737 / 777 limits move into the PMDG set
• Tablet 2.0: the daily content check in Fenix Hangar
• Tablet 2.0: Hawker EFB synoptics and the C-17 Airdrop page move into their sets

• Reacts to PMDG Hangar fire and smoke warnings.

• First release.

• Branded installer
• 1.1.0 in the works

• Hold to keep moving: hold a move, look or zoom hotkey, a joystick / throttle / HOTAS button bound to one, or a Stream Deck / StreamDock zoom key, and the camera keeps moving until you let go.
• The ZOOM IN / ZOOM OUT buttons on the Live cams page and the FINE TUNE move and look buttons in the view editor work the same way when you hold them
• Zoom stops at its limits instead of piling up zoom you then have to undo

• The aircraft's own cameras work: a click under LIST AIRCRAFT CAMERAS now switches to that view, the status line says whether it moved, and Save sim camera keeps it
• Long camera lists show in full
• Level horizon covers every camera: chase, orbit, fly-by, tower and runway keep a level horizon and aim where they did

• Give camera back can keep the view
• 1.0.9.1 in the works

• NEW in-sim CheckRide panel on the MSFS toolbar: works in VR, no OpenKneeboard
• Live status, Start/Restart, Repeat and Skip from the panel; A-/A+ zoom for VR
• Setup installs the panel into your Community folder

• Flight replay on the debrief, new Private and Commercial maneuvers, crash detection, landing share card

• CheckRide uses the airport transition altitude, and a stuck Fenix gear reading no longer fails a normal landing.
• Duke profiles, class fallback, and re-read the aircraft when it changes
• Debrief: tidier degree readouts in Work on
• Debrief: one tip when a task misses on several items
• Debrief header: separate the aircraft and route with a dot
• Logbook page, verdict tile and Garmin-style charts

• Only a real pause skips the start-speed check
• The panel says why before leaving a failed tablet flight
• Start paused no longer blocks the coach or fails falsely
• Start the coach only at the start point, answered or not
• Coach only an aircraft that is really at the start point
• CTC Coach panel turns see-through the moment Fly it is pressed

• Autopilot and FMS set-up before the approach starts

• Fenix A319 / A320 / A321 ready for Fenix 3.0: every circuit breaker syncs under Fenix 3.0's new breaker names, plus 3.0's PACK FLOW selector, the A321 FUEL ACT button and the EXIT / MID cabin calls.
• Both pilots run 0.4.1 for the Fenix key presses; a 0.4.0 pilot still connects.

• Put it in my SimBrief: the other pilot's plan opens in your own SimBrief, filled in, so your EFB / FMS can import it.
• The plan window tells you when both pilots have the same flight, each in their own SimBrief.

• Fenix profile follows Fenix A32X 3.0
• Fenix shared-cockpit fixes

• First release: Locked cockpit and Outside only cameras, sim window spanning, popped-out panel layouts, true-size FOV calculator, start with MSFS

• Say again: with Voice ATC on, every transmission has a button that plays what the controller actually said
• Standby in one tap: a Standby button next to Tune COM1 on every handoff and on every controller in the ATC list; "switch to", "change to" and "call ... on" count as handoffs too
• ATIS changed alert: your departure or arrival ATIS moves to a new letter and you're told what changed
• ATC online alert: a controller on your route logs on and you're told, with a one-tap Standby button

• ICAO phonetic readbacks
• Stream Deck plugin reports its real version
• Fixed Stream Deck setup saying the plugin "didn't take" after a successful update

• Branded installer
• 2.6.1 in the works

• Branded installer
• 1.0.2 in the works
• Decks with no aircraft match are Ready but not pickable
• Ship deck definitions inside Virtual Deck
• Readable standby and decimal points; demo simulates the transponder
• Flight deck panel renderer with auto-fit, display windows and knobs

• Beam Eye Tracker support via opentrack: new MY TRACKER choice with setup steps in the app
• Header shows BEAM TRACKING IN / NO BEAM DATA
• Warning when a second tracker moves the MSFS camera at the same time

• Renamed to MotionDeck. Settings and auto-start carry over.

• Branded installer
• Work alongside ChasePlane

• Detect MSFS 2020 by application name
• Only touch the sim during a loaded flight; cap traffic to the configured radius