Flysimware Sierra C24R set - for CTC Aircraft Maintenance

One .amm file for the Flysimware Beechcraft Sierra C24R, with all three panels (G3X with GNS 530, G3X with GTN 750 / 750Xi, G5 / steam). Load it and CTC Aircraft Maintenance recognises it from the sim's title and opens an airframe with everything the app does: tech log and MEL, part wear, scheduled inspections, stores, documents and the maintenance desk.

- An MEL built from the FAA Master Minimum Equipment List for Single Engine Airplanes, Revision 2: 55 items, one for every fitted part, each with its repair category, number installed and required and the (M) / (O) procedures. Equipment the MMEL does not list is NO GO.

- The Sierra as certified: speeds, weights, C.G., load factor, engine, propeller and instrument limits from the Beechcraft C24R POH (type certificate A16CE).

- Lycoming IO-360-A1B6 (TCDS E-286): 200 hp at 2,700 rpm, with its four cylinders, two magnetos, eight plugs, four injectors, the engine-driven pump and the RSA-5 servo as their own parts.

- The real systems: 14 V electrics with a backup battery, electro-hydraulic gear (power pack, warning horn, three lights, free-fall valve), engine-driven and electric standby vacuum, two wing tanks, 14 systems by ATA in all.

- The real inspection programme: 50-hour oil and filter, 100-hour and annual inspections.

- The cockpit read live: 48 Flysimware L:vars. SimConnect only, read only.

For simulation use only.