UtilitiesMSFS 2024

Piper M600 set - for CTC Aircraft Maintenance

The FSReborn Piper M600 for MSFS 2024 with a newly modeled 3D PT6A-42A engine and 3D airframe and system pages with cutaways, an MEL from the FAA single engine MMEL Revision 2 and the M600's own limits in one .amm set.

No reviews yet 2 downloads $9.95

Version 2.0.1

by ClearedToCode

95 KB

Discord Member Discount: 10% off for Discord members.

Instant download

MSFS 2020 + 2024

Tested before release

Built by simmers

Requirements

- CTC Aircraft Maintenance 2.0.0 or later (or any ClearedToCode Hangar that takes every set). - The FSReborn Piper M600 for MSFS 2024. - Windows 10 / 11.

About this add-on

★ Newly modeled 3D PT6A-42A engine with cutaway, exploded and x-ray views: the propeller and gas generator turn with live Ng and prop rpm, the hot section glows with ITT, and every part takes its wear colour. Tap a part to open it.

★ Newly modeled 3D airframe and systems: eight pages (systems overview, electrical, fuel, hydraulics, bleed / pressurization, ice protection, flight controls / gear, doors / fire / lights) on one 3D M600 you can turn, cut away, explode and x-ray, lit from the sim.

★ MEL built from the FAA Master Minimum Equipment List Single Engine Airplanes, Revision 2: 76 items with their MMEL numbers, repair categories, provisos and (M)(O) procedures.

The FSReborn Piper M600 for CTC Aircraft Maintenance.

- One P&WC PT6A-42A, 600 SHP: torque, ITT, Ng, prop and oil limits and life limited parts.

- The M600's own systems: 18 systems by ATA chapter and 12 panels: the starter-generator and standby alternator, two wing tanks of 130 gal, the gear power pack, bleed air pressurization to 5.6 psi, boots, prop de-ice, the heated windshield and the inertial separator.

- Garmin G3000: two PFDs and the MFD, each its own part with its own MEL item.

- Failures go into the aircraft through the sim's own engine, pitot and engine fire failures; every other defect is written up in the tech log with its MEL item.

- Tech log, wear, the PA-46-600TP inspection programme, MCC and the fleet.

Changelog

v2.0.1 (.amm)

- The 3D M600 is newly modeled to the real airframe on every page: cowl and spinner, cabin shape, windshield and windows, airstair door and emergency exit, swept tapered wing, stabilizer, fin and dorsal fillet.

v2.0.0 (.amm)

- First set for the FSReborn Piper M600 (MSFS 2024).

- Newly modeled 3D PT6A-42A engine page and eight 3D airframe and system pages with cutaways.

- MEL from the FAA single engine MMEL Revision 2.