UtilitiesMSFS 2024

FSReborn Phenom 300E Hangar — maintenance tablet for the FSReborn Phenom 300E, with one aircraft set free

CTC Aircraft Maintenance with the FSReborn Phenom 300E built in, its MEL from the FAA EMB-505 MMEL Revision 5, plus one more aircraft set of your choice free with every purchase

No reviews yet 0 downloads $24.95

Version 3.0.5

by ClearedToCode

38.8 MB

Discord Member Discount: 10% off for Discord members.

Instant download

MSFS 2020 + 2024

Tested before release

Built by simmers

Requirements

Microsoft Flight Simulator 2024 with the FSReborn Phenom 300E. Windows 10/11. A browser on the same PC (or a tablet / phone on your network). Internet once to activate the serial and claim the free set.

About this add-on

★ MEL built from the FAA Master Minimum Equipment List EMB-505, Revision 5: 111 items, each with its MMEL item number, repair category and dispatch conditions.

★ One more aircraft set FREE: pick any .amm set from our list inside the tablet.

FSReborn Phenom 300E Hangar is CTC Aircraft Maintenance with the FSReborn Phenom 300E built in. Every airframe you fly keeps its own history: hours, cycles, parts that wear out, a tech log and MEL, servicing, scheduled checks and a GO / NO-GO dispatch status.

The Phenom 300E built in

- Two P&WC PW535E1 engines with dual-channel FADEC, the FSReborn start and oil limits and life limited parts, exceedances written up against the engine you fly.

- Newly modeled 3D engines: a cutaway of the PW535E1 (fan, booster, HP compressor and impeller, reverse-flow combustor, HP and LP turbines, gearbox) turning with live N1 / N2, glowing with ITT, each part in its wear colour.

- The Phenom 300E's own systems: the 28 V DC network with both starter-generators, BATT 1 and BATT 2, the DC, EMER, HOT BATT and SHED buses and ground power; the 3,000 psi hydraulic system with gear free-fall; wing tanks with DC and ejector pumps; bleed air, the vapor cycle system, pressurization and ice protection.

- Sixteen system pages, drawn live from the aircraft: Systems overview, Engine trend, Electrical, Fuel, Hydraulics, Bleed / Pressurization, Engines, 3D engines, Ice protection, Flight controls, FSR maintenance, Oxygen and servicing, Power distribution, Doors and fire panel, the IPC and AMM work cards.

One aircraft set free

Open Settings › License after you activate your serial, pick one aircraft set from our .amm list and press Claim. The set installs on its own and stays yours. One free set per serial.

Every other aircraft too

FSReborn Phenom 300E Hangar takes every ClearedToCode .amm set, from any maker (PMDG, Fenix, iniBuilds, Black Square, BlueBird and more), bought on clearedtocode.com and installed inside the tablet or from a file.

What it does

- Tech log and MEL, part wear, scheduled checks, stores, documents, the IPC, flight history, the fleet board, reliability report, backups and the records pack.

- How you fly counts: overspeeds, hard landings and exceedances are written up and can ground the aircraft (NO-GO) until fixed.

- CTC CDL included.

Try it: 1 hour free. Then a FSReborn Phenom 300E Hangar serial unlocks it for good, on 2 of your PCs.

SimConnect only. Part lives, check intervals and prices are estimates, marked "estimated" in the app. FSReborn Phenom 300E Hangar is an independent add-on by ClearedToCode, not affiliated with, endorsed by or supported by FSReborn, Embraer or Pratt & Whitney Canada.

clearedtocode.com · discord.gg/MrcTkZ3YXq

Changelog

3.0.5 (November 12, 2026) · free update

- Released together with the X-Plane tablets, which now include CTC Wear: persistent wear, tear and failures for every aircraft in X-Plane 12.

- The tablet update check now accepts the X-Plane download's Setup.exe, so every edition keeps updating itself from inside the app.

3.0.4 (November 12, 2026) · free update

- New 3D Aircraft page: the 3D engines, airframe and systems pages of your aircraft set have their own entry in the menu and a tile on the home screen.

- They show whenever the loaded set has 3D pages, with or without the sim running; live readings fill in once the sim is connected.

3.0.3 (November 12, 2026) · free update

- Aircraft tiles never go blank: the tablet saves the real picture of each tail's livery, so the tile keeps it with the sim closed or after a livery package moves.

- On first start the tablet reads every installed livery once and saves the pictures of the aircraft it knows (your airframes, your Virtual Airlines fleet and CTC Shared Hangar tails), then keeps them up to date in the background.

3.0.2 (November 11, 2026) · free update

- Every tablet can now run CTC Shared Hangar, the new in-tablet app for virtual airlines: one set of airframe records shared by the whole airline, with dispatch, engineering, grounding (AOG), holds and a fleet log.

- Apps can now keep an aircraft's airframe record, its parking spot and cockpit switches, and its livery.

3.0.1 (November 8, 2026) · first release

- FSReborn Phenom 300E Hangar: CTC Aircraft Maintenance (Tablet 3.0) with the FSReborn Phenom 300E set built in: the PW535E1 engines in 3D, sixteen system pages, and the MEL from the FAA EMB-505 MMEL Revision 5.

- One more aircraft set of your choice free with every serial.